Description; Transport Trolley Components - Hilti TE 3000-AVR Mode D'emploi

Obligation signs
en Wear eye Wear a hard
protection
Wear safety Wear
shoes breathing
protection
Symbols
Read the Return waste
operating material for
instructions recycling.
before use
Alternating Double-
current insulated
(depending
on tool
model)
Equipped
with theft
protection
system

2 Description

2.1 Use of the product as directed
The power tool is a hand-guided electric tool for chiseling on concrete, masonry and asphalt. Other applications are
compacting and excavation (e.g. in soil).
Working on materials hazardous to the health (e.g. asbestos) is not permissible.
The power tool is designed for professional use and may be operated, serviced and maintained only by trained,
authorized personnel. This personnel must be informed of any special hazards that may be encountered. The power
tool and its ancillary equipment may present hazards when used incorrectly by untrained personnel or when used not
as directed.
Its typical working environment is construction sites of all kinds and it may be used for construction work, finishing,
renovation, demolition and road work.
The power tool may be used only in a dry environment.
Do not use the power tool where there is a risk of fire or explosion.
2
Wear ear
hat protection
Volts
Hertz
Location of identification data on the power tool
The type designation and serial number can be found
on the type identification plate on the machine or tool.
Make a note of this data in your operating instructions
and always refer to it when making an enquiry to your
Hilti representative or service department.
Wear
protective
Type:
gloves
Generation: 01
Serial no.:
Amps
Lock symbol