Publicité
Les langues disponibles
Les langues disponibles
Installation
ool required: Philips screwdriver, Flat bladed, screwdriver.
T
•
Ensure the unit is unplugged and empty.
•
To take the door off, it is necessary to tilt the unit backwards. You
should rest the unit on something solid so that it will not slip during the
door removing process.
•
All parts removed must be saved to do the reinstallation of the door.
•
Do not lay the unit flat as this may damage the coolant system.
•
It's better that 2 people handle the unit during assembly.
1.
Remove the top right hinge cover.
2.
Undo the screws. Then remove the hinge bracket.
3.
Remove the top left screw cover.
4.
Move the core cover from left side to right side.
And then lift the upper door and place it on a
padded surface to prevent it from scratching.
.
8
Publicité
