Braun 7899cc Mode D'emploi page 20

Battery 1. Foil and cutter are worn
performance
dropped
significantly. 2. Shaver head is regularly
Shaving 1. Foil and cutter are worn.
performance 2. Personal setting of shaving
dropped
significantly.
3. Shaving system is clogged.
Shaver turns Foil and cutter are worn
off with fully which requires more power
charged battery. than the motor can deliver.
The appliance turns off.
Battery Foil and cutter are worn
segments in the which requires more power
display are for each shave.
skipped with
decreasing
battery capacity.
Shaving parts Reset button has not been
have been pushed.
changed recently
but replacement
symbol lights up.
Shaver head is 1. Drying time after automatic
damp.
2. Drain of the Clean&Renew
3. Cleaning cartridge has
20
All manuals and user guides at all-guides.com
which requires more power
for each shave.
cleaned with water but not
lubricated.
performance has been
changed.
cleaning was too short.
station is clogged.
been used for quite a while.
1. Renew Foil & Cutter cassette.
2. If the shaver is regularly cleaned
with water, apply a drop of light
machine oil on top of the foil once a
week for lubrication.
1. Renew Foil & Cutter cassette.
2. For a thorough and fast shave we
recommend the green (intensive)
setting.
3. Soak the Foil & Cutter cassette into
hot water with a drop of dish liquid.
Afterwards rinse it properly and tap
it out. Once dry apply a drop of light
machine oil on the foil.
– Renew Foil & Cutter cassette.
– Regularly oil the shaving system,
especially when cleaning with water
only.
– Renew Foil & Cutter cassette.
– Regularly oil the shaving system,
especially when cleaning with water
only.
– Push the reset button for at least 3
seconds to reset the counter.
1. Clean directly after shaving to allow
enough time for drying.
2. Clean the drain with a wooden
toothpick. Regularly wipe the tub
clean.
3. The ethanol/isopropanol proportion
has decreased while the oil
proportion has increased. Remove
residue with a cloth.