Product Description - EUROM SPV550i-Prof Instructions De Service

manufacturer are NOT liable for unprofessional repairs and/or
modifications to the pump. Such activities cancel the warranty.

Product Description

Submersible pumps are mainly used for water draining, displacing liquids, emptying
water reservoirs/cellars/etcetera, pumping water out of wells and ducts, and
emptying boats and yachts as well as circulating water.
The pumps are completely waterproof and can be submerged in liquids up to a
maximum depth of five (5) metres.
Submersible pumps are suitable for the following liquids:
- Clean or slightly contaminated (contaminating substances may not be larger
than maximum Ø35 mm)
- Swimming-pool water (on condition that the maximum dosage of additions is not
exceeded)
- Soapy water
Corrosive, highly flammable or explosive liquids (such as petrol, diesel, petroleum,
thinner, etc.), fats, oil, salt water, contaminated toilet water, etcetera are not allowed
to be pumped!
The temperature of the pumped liquid may not exceed 40°C.
The SPV550i and SPV750i(s) pumps have an internal one-phase and asynchronous
engine and a water pump under the engine. The pump drives the recessed impeller.
The pump has a stainless steel housing (combined with cast iron in the SVP750is),
has excellent capacity and is suitable for transporting large granules and lumps.
Depending on the required water level, the float switch can either start or stop the
pump automatically.
The dirty-water pumps are used in the industrial, construction, agricultural and
mining sector, in an urban environment, etc. They are the ideal device to pump waste
water or sewage that contain granules, short fibres, paper residue, mud or sand as
well as to drain or irrigate in the agricultural sector, to dredge ditches and ponds, etc.
The pump is not allowed to be used in environments that have a risk of fire or
explosion.
16