Technical Details; Safety Guidelines - EUROM SPV550i-Prof Instructions De Service

Technical details

Output capacity
Electrical
connection
Maximum voltage
deviation
Maximum output
Maximum pump
head
Maximum under
water
Maximum
contaminating
substances
Maximum water
temperature
Average Ph value
Ø water drain
Cable
Cable length
Dimensions
Weight

Safety Guidelines

 For reasons of safety, your submersible pump must always be
connected to an earthed socket, which has been installed as part of the
electricity grid according to the national regulations. It is minimum 16A
fused and has an earth leakage circuit breaker (nominal current ≤30
mA).
 Before each use, check your pump, electrical cable, plug and socket.
Do NOT use any of them, if you detect damage, but have a certified
electrician repair them. The cable is a type H07RN-F cable.
 At all times, make sure that electrical connections (plugs, etc.) are dry
and remain dry.
 Before use, check whether the socket to which you want to connect the
pump is suitable for the pump (230V/50Hz; see the type plate).
 Protect the electrical cable and plug against heat, oil and sharp
corners.
 First, clean the drain hose before use.
SPV550i
550W
230V~50Hz
10%
300 l/min
8 m
5 m
35 mm
40℃
4 - 10
2" female thread &
2" tulle
H07RN-F 3G1.0mm² H07RN-F 3G1.0mm² H07RN-F 3G1.0mm²
10 m
23 x 20 x 46.5 cm
12.5 kg
SPV750i
750W
230V~50Hz
10%
367 l/min
9.5 m
5 m
35 mm
40℃
4 - 10
2" female thread &
2" tulle
10 m
23 x 20 x 46.5 cm
14 kg
14
SPV750is
750W
230V~50Hz
10%
367 l/min
10 m
5 m
35 mm
40℃
4 - 10
2" female thread &
2" tulle
10 m
23 x 20 x 46.5 cm
10.9 kg