Publicité
Les langues disponibles
Les langues disponibles
To unlock the controls
Press and hold CONTROLS LOCK/UNLOCK for 3 seconds until
the status light turns off.
NOTE: To lock or unlock the controls when the washer is off,
press and hold CONTROLS LOCK/UNLOCK for 3 seconds.
Door Locked
When the status light glows, the door is locked.
Sensing/Revising Estimated Time
The cycle times vary automatically based on your water pressure,
water temperature, detergent, and clothes load.
The washer will automatically sense the progress in the cycle and
adjust the Estimated Time Remaining display. While the washer is
sensing, the estimated time will flash and the Sensing status light
will glow. When the sensing is complete, the flashing stops, the
status light goes off, and the Estimated Time Remaining display
is updated.
The cycle time will be extended if oversudsing occurs or the load
is unbalanced. The SUD routine removes extra suds and assures
proper rinsing of your garments. See "Troubleshooting." During
the unbalance routine, the time displayed may pause until this
activity is complete, then resume with the remainder of the cycle.
Clean Washer Reminder
The Clean Washer Reminder light illuminates to remind you to
use the Clean Washer cycle regularly. The reminder light will
illuminate every 30 cycles. The reminder light may be reset by
either running the Clean Washer cycle, or by pressing the CLEAN
WASHER RESET button.
Cycles can be selected by turning the Cycle Control knob to the
desired cycle. Each cycle is designed for different types of fabric
and soil levels. The modifier indicator lights, on the right-hand
side of the panel, will change as cycles are selected.
■
Each cycle has a preset Soil Level (estimated cycle time),
Water Temperature, and Spin Speed, and may have preset
options. The preset settings provide the recommended fabric
care for the selected cycle.
■
The preset settings will glow green to show the preselected
options and modifiers, and can be changed anytime before
START is pressed. Not all options and modifiers are available
with all cycles. Available selections glow amber. (To change
settings after the cycle has started, press PAUSE/CANCEL
once, then select the desired settings. Press START to continue
the cycle.)
■
Powdered detergents may not dissolve well in a slow-speed
cycle. For best results, use liquid detergent in slow-speed
cycles.
Cycles
Preset cycle settings
Each cycle has a preset Soil Level (cycle time), Water Temperature,
and Spin Speed. The preset settings provide the recommended
fabric care for the selected cycle. See chart.
Cycle
Soil Level
(cycle time)
Whitest
Normal
Whites
(1:20)
Heavy Duty
Normal
(1:10)
Bulky Items
Normal
(0:55)
Active Wear
Normal
(0:40)
Normal/
Normal
Casual
(0:50)
Delicate
Normal
(0:40)
Wool
Normal
(0:30)
Silk
Normal
(0:25)
Hand
Normal
Washables
(0:30)
Quick Wash
Light
(2-3 items)
(0:25)
Clean
N/A
Washer
(0:65)
Soak
Normal
(0:30)
Rinse/Spin
Normal
(0:22)
Drain/Spin
Normal
(0:13)
To change the preset cycle settings
Press the selector of each available setting until the desired
setting glows green.
Whitest Whites
This cycle is especially designed for cleaning loads of soiled white
fabrics with the addition of bleach. Hot washing temperatures
assure optimal bleach activity. An additional rinse provides optimal
rinse performance to avoid chlorine residues on your laundry.
This cycle combines fast-speed tumbling, longer wash time,
and extra high speed spin to shorten drying time.
Heavy Duty
Use this cycle to wash loads of sturdy, colorfast fabrics and
heavily soiled garments. This cycle combines fast-speed tumbling,
longer wash time, and extra high speed spin to shorten drying times.
If the water temperature is lower than needed for this cycle,
the heater will warm the water to the optimum temperature.
Water Temp
Spin Speed
Hot/Cold
Extra High
Hot/Cold
Extra High
Warm/Cold
Low
Warm/Cold
Medium
Warm/Cold
High
Warm/Cold
Medium
Warm/Cold
Medium
Cold/Cold
No Spin
Cold/Cold
Low
Warm/Cold
Extra High
N/A
N/A
Warm/Cold
No Spin
Cold/Cold
Extra High
N/A
Extra High
15
Publicité
