USE OF AUTOMATIC MENUS
Your oven has pre-programmed menus: it will automatically determine
the mode, time and temperature according to the weight or size of the
dish that you enter.
To exit the clock display and access the settings before cooking, press the
menu button desired.
For menus with weight setting:
• Select the desired menu and the corresponding button lights up. The
weight flashes on the screen and you have to enter the weight of your
meat, poultry or fish by pressing the
displayed adjusts automatically according to the weight selected. Press
the
button to confirm. Depending on the menu, the oven starts
in cooking phase or in preheating phase. In the case of preheating (see
the relevant menus in the table on the following page), a countdown
of 10 minutes appears on the screen. For good cooking results, the dish
should only be put in the oven when this countdown is complete. To do
this, wait for the end of preheating signal (2 long beeps), then put your
dish in the oven and press
Note: if you do not confirm the cooking, it will be automatically
cancelled after 30 minutes.
Please note: You can change the temperature, the time or the mode at
any time during cooking. You then switch to manual mode. The menu
button goes off but the cooking continues according to the settings
you have changed.
and
keys. The cooking time
again to start cooking.
EN
21