Publicité
Les langues disponibles
Les langues disponibles
SETTING THE CLOCK
• When using it for the first time, you can set the time displayed on your
screen.
• When you plug in your oven, the screen displays "
the hours using the
Repeat the same process for the minutes.
Please note: The time is not saved when the oven is unplugged. You
must repeat this process every time you connect your oven.
UNPACKING AND USING FOR THE FIRST TIME
1
• Remove the oven from its packaging, taking care not to pull it by the
handle (1). Remove all stickers and protective materials inside and
outside your oven. Place your oven on a stable surface. Clean the
enamelled or lacquered surfaces (2) and the door (3) with a damp
sponge with mild detergent. Dry well.
• Unwind the cable and plug it into an earthed electrical power outlet (4).
• Before using for the first time it is recommended that you heat your
oven at the maximum temperature for 10 minutes. To exit the clock
display and access the settings before cooking, press the
Press the
Press the
of 240°C is displayed. Then press the
time and use the
of 10 minutes. Press
The cooking time countdown is displayed on the screen and the inside
light stays on.
• After 10 minutes the oven sounds and the screen displays "End".
and
button until convection cooking mode
button then
and
buttons to to reach the recommended time
to confirm your settings and start heating.
buttons and confirm by pressing
2
and
until the maximum temperature
button to display the default
". First adjust
3
button.
is selected.
EN
.
4
17
Publicité
