Operation; Activating/Deactivating The Magnetic Clamp - BDS Maschinen MAB 855 Mode D'emploi

Operation

Operation

Activating/deactivating the magnetic clamp

48
Activating the magnetic clamp
CAUTION
►
To prevent the magnet from overheating, switch on the
magnetic clamp only when the machine is standing on a
magnetic substrate.
‹
Turn on the switch (22). The indicator lamp in the switch (22)
lights up.
‹
Check the magnetic clamping force at the magnet indica-
tor (23). If the magnetic clamping force is sufficient, the
MAGNET POWER indicator lamp (23) is green. If the MAG-
NET POWER indicator light (23) is red, sufficient magnetic
clamping force is not available.
CAUTION
►
The maximum magnetic clamping force is only available
after switching on the motor.
Deactivating the magnetic clamp
‹
Hold the handle tightly (9) to stop the machine from slipping.
‹
Turn off the switch (22). The indicator lamp in the switch (22)
extinguishes.
MAB 855