Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
DANGER
WARNING
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Work Surface Use Requirements
Intended for use with Gladiator
and GearDrawer cabinets only.
Maximum weight limit is 1400 lbs (272.15 kg) for the work
surface supported by two Gladiator
GearBox cabinets.
Tools and Parts
Gather the required tools and parts before starting installation.
Tools Needed:
Phillips screwdriver
Parts Supplied:
L-Shaped brackets (2)
Install Work Surface
WARNING
Excessive Weight Hazard
Use two or more people to move, assemble or install
work surface.
Failure to do so can result in back or other injury.
1. Unpack work surface and dispose of/recycle all packaging
materials.
2
WORK SURFACE SAFETY
Your safety and the safety of others are very important.
INSTALLATION INSTRUCTIONS
®
Welded-Steel Modular GearBox
®
Welded-Steel Modular
#10–1" Phillips flat-head self-
tapping screws (2)
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
®
2. Move two Gladiator
modular units to the desired location.
3. Position the two Gladiator
the bumpers are touching, as shown. Lock the casters.
4. Place the work surface across the top of the modular units with
the smooth edge to the front and the edge with the holes to the
back.
NOTE: Make sure the work surface is fully seated between the
raised edges of the cabinet tops.
®
modular units side-by-side so that
Publicité
Table des Matières
