Cabinet/Locker Safety; Assembly Instructions; Tools And Parts; Cabinet/Locker Use Requirements - Whirlpool Gladiator GRANDE ARMOIRE À OUTILS ET CAISSE À OUTILS EN ACIER SOUDÉ Instructions D'assemblage

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
DANGER
WARNING
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.

Tools and Parts

Gather the required tools and parts before starting installation.
Tools Needed:
⁷⁄₁₆" Socket wrench
³⁄₈" Wrench
Parts Supplied for Locker Model:
Rigid casters (2)
Swivel casters (2)
¹⁄₄" – 20 Self-locking nuts (16)
¹⁄₄" – 20 x ¹⁄₂" Carriage-head
bolts (16)
Parts Supplied for Cabinet Model:
Rigid casters (2)
Swivel casters (2)
¹⁄₄" – 20 Self-locking nuts (16)
¹⁄₄" – 20 x ¹⁄₂" Carriage-head
bolts (16)
2

CABINET/LOCKER SAFETY

Your safety and the safety of others are very important.

ASSEMBLY INSTRUCTIONS

Phillips screwdriver
Flat-blade screwdriver
Half-width shelves (4)
Double hooks (2)
#10 – 24 x ¹⁄₂"
Pan-head screws (4)
#10 – 24 Nuts (4)
Key (1)
Full-width shelves (3)
Key (1)
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.

Cabinet/Locker Use Requirements

Intended for use in a garage.
Maximum weight limit is 50 lbs (22 kg) for each shelf, not to
exceed 300 lbs (136 kg) for the cabinet/locker.
Maximum weight limit is 300 lbs (136 kg) for the cabinet/locker.

Unpack the Cabinet/Locker

1. Remove the key located in the handle, and unlock the door.
2. Remove and verify the contents. See "Parts Supplied" for your
model.
3. Dispose of/recycle all packaging materials.
NOTE: Keep the two rear cardboard corners. They are needed to
cushion the cabinet/locker during caster installation.