Publicité
Les langues disponibles
Les langues disponibles
• Do not hang or even lean the appliance against any walls.
• Place the fan heater far from any other source of heat, from flammable material (curtains,
tapestries, etc.), from flammable gases or explosive objects (spray cans) and from materials
that can be deformed by heat. Make sure there is 120 cm of free space in front of the fan
heater and 50cm free space on both sides and behind it.
• The surface where the appliance is used must be stable, spacious (do not use on shelves),
level (since the appliance could tip over) and heat resistant.
USING THE APPLIANCE
First use: run the appliance to eliminate the "new smell" and any oil residue from the
manufacturing process for at least 10/15 minutes. During this operation, ventilate the room
well to eliminate the "new smell" that is given off by the appliance.
The fan heater is equipped with the following adjustment devices:
The appliance comes with a thermostat, selector switch, indicator light, tipping switch and
safety device:
- the selector (B) switch controls the following:
"0" = off
Fan: Silent "
Heat: "
"= hot air (1000W)- "
- the thermostat (C) adjusts the ambient temperature, and is greater when the selector is
turned towards the maximum position (clockwise direction): once the temperature has been
reached, it will be kept constant, while setting it to the lines in between causes the element
to come on at intervals.
- The indicator light (D) turns on when the appliance is switch on
- left-right oscillation: switch on the key (A) for the swinging to let the stove swing to the left
and to the right "I", switch off in pos. "■".
- The base has an anti-tipping switch, which allows the appliance to run while the fan heater
is correctly positioned (when correctly placed you will hear it "click") but stops operation if
the appliance tips over.
"- Strong "
"
"= very hot air (2000W)
A.
Oscillation left-right switch
B.
Selector
C.
Termostat
D.
Signal lamp
13
Publicité
