3-Rack Loading - Jenn-Air JDB-5 Guide D'utilisation Et D'entretien

3-R
ACK
10 Place Setting Load
Upper Rack
1 saucer
is loaded
behind
dinner
plates.
Middle Rack
Lower FlexLoad
Upper Rack
Glasses, cups, stemware,
light-weight plastics,
plates, bowls, pans, long-
handled utensils etc. can
be loaded in this rack. Do
not load glasses over
the tines.
The Stack-Rack (select
models) on the right side
of the upper rack folds
up or down for loading
flexibility. Fold it down to
hold long-handled
knives, spatulas and
spoons or short items
L
OADING
™ Rack
(
SELECT MODELS
like cups or juice glasses. Fold it up for taller items like
glasses, bowls, plates, etc.
The edge of the Stack-
Rack (select models) is
designed to hold stemware
in place. Taller stemware
will fit better on the right
side as the upper rack is
deeper on this side.
The Folding Tines (select
models) located in the front
right corner provide
convenient loading space for
large, bulky items like pots
and pans or mixing bowls.
To lower tines, carefully
push the tines out of each
holder toward the center of
the rack and lay the tines
down.
The Cup Clips (select
models) located in the
center of the upper rack
can be used to hold light-
weight plastic items,
cooking utensils, knives,
etc. in place. Clip the item
between the tine and the
clip.
The Vari-Lock ™ Snugger
(select models) on the left
secures lightweight items in
place. It can be adjusted by
grasping the wavy wire and
rotating it left to snug items
against the outer rack or to
the right to rest on top of
light items. Do not load
items on top of the wire.
For best results with tall
glasses, rest the bottom of
the glass against the wavy
wire of the Vari-Lock
Snugger (select models).
6
)
™
Cont.