Publicité
Les langues disponibles
Les langues disponibles
ELECTRONIC GRAPHIC
DSP SURROUND
EQUALIZER
This unit provides the following five different equalization
modes.
ROCK: Powerful sound emphasizing treble and bass
POP: More presence in the vocals and midrange
JAZZ: Accented lower frequencies
for jazz-type
music
CLASSIC: Enriched sound with heavy bass and fine treble
BGM: Calm tone with suppressed bass and treble
Press one of the GEQ (Graphic Equalizer) buttons.
The selected
mode
name
appears
on the display
for four
seconds,
and the selected
mode on the display is enclosed
with
parentheses.
Selected mode
ij~
C2C)OLJ
OC)GJC3
MANUAL
DSPI
DSP
Q
:
SELECT
GEQ OFF
UPA
c3cJc2
Oc)a
Qca
t
0
I
MANUAL
z
"p
~p:;cT
'1,,
/
DObfiN<
/'
!.,
DSP
DOWNY
The DSP (Digital Signal Processor)
surround circuits can recreate
the effect of sounds
reflected
from walls or ceilings,
to obtairl
the sound presence
of real environments.
There are four modes
with matching
graphic equalization
modes.
Equalization
modes,
are selected
automatically
and can also be selected
or turnecl
off to suit your preference.
Press one of the DSP buttons (DANCE, LIVE, HALL or
ARENA).
The selected
mode
name
appears
on the display
for four
seconds,
and the selected
13SP and matching
GE(J modes orl
the display are enclosed
with parentheses.
Selected DSP mode
Matching GEQ mode
When the music source is monaural
Select LIVE to obtain a simulated
stereo effect. When DAINCE,
HALL or ARENA
is selected,
no sound will be heard from the
To cancel the selected mode
surround
speakers.
Press the selected
button
again.
"GEQ OFF
appears
on the
To cancel the selected mode
display.
Press the selected
button
again.
"DSP OFF
appears
on the
display. Even if canceling
the selected
DSP mode, the matching
To select with the remote control
or selected
GEQ mode still remains. To cancel both the selectecl
Press the GEQ button repeatedly
until the desired
equalization
DSP mode and the matching
(or selected)
GEQ mode at the
mode is displayed.
same time, press the DSP/GEQ
OFF button.
To select with the remote control
Press the DSP button repeatedly
until the desired DSP mc]de is
displayed.
To
adjust
the volume
and balance
of the surrouncl
speakers
Press the MANUAL
SELECT
button twice or three times, while
the DSP system
is turned
on, to display
"S-R
OdB
(for right
surround speaker) or "S-L OdB (for left surround
speaker).
Then
press
the
DOWNVor
UPA
button
repeatedly
within
four
seconds.
Note that the surround
speakers
volume and balance of the 5."1
CH and Dolby Pro Logic modes are also changed.
The DSP system
is automatically
canceled:
- when the Dolby Pro Logic is turned on
- when the 5.1 CH function
is selected
The DSP system cannot be turned on:
- while the 5.1 CH function
is selected
- while headphones
are plugged
in
ENGLISH
8
Publicité
