Publicité
Les langues disponibles
Les langues disponibles
PRESETTING STATIONS
Numbered
buttons
TUNER
BAND
The unit can store a total of 32 preset stations.
When a station is
stored, a preset number is assigned to the station. Use the preset
number to tune in to a preset station directly.
1
2
3
Press the TUNER button to select the band, and
press the
UPA
or DOWN7
button to select a
station. Direct tuning is also available.
Press the SET button to store the station.
A preset number assigned
to the station,
beginning
from 1 in
consecutive
order for each band, flashes
in the display
for
two seconds.
Repeat steps 1 and 2.
No "more stati&s
will be stored if a total of 32 stations
have
already been stored for all the bands.
m
PRESET NUMBER TUNING
1 Press the TUNER button to select a band.
2 Press the nulmbered buttons to select a preset
number.
Example:
To select preset number 25, press 2 and 5.
To select preset number 7, press O and 7.
To clear a preset station
Select the preset nllmber of the station to be cleared
Then, press
the SET button,
and press the SET button
again within
four
seconds.
The preset
numbers
of all other stations
in the band with higher
numbers
are decreased
by one.
When using the remote control
Press the TUNER
13 AND button to select a band, then press the
numbered
buttons to select a preset number,
When the AM tuning interval
is changed,
all preset stations
are
cleared.
The preset stations
have to be set again.
IHVGL/.W/
II
2
Publicité
