Aiwa AV-D30 Mode D'emploi page 5

—.
@ and @in the illustration correspond to the following details,
I
CONNECTING SPEAKERS @)
Front speakers
Speaker terminals
Connect front speakers (system A and/or B), a center speaker,
surround speakers andsubwoofer tothe corresponding speaker
terminals onthe unit:
- the front speaker cords to the FRONT SPEAKERS terminals
- the center speaker cord to the CENTER SPEAKER terminals
- the surround speaker cords to the SURROUND SPEAKERS
~;:::::e:;
insert the speaker cord lead Q ~
close the flap. Check that the
terminals.
- for more powerful bass, the sub woofer (with a built-in amplifier)
1
cord to the SUPER WOOFER d iack
Surround speakers
Speaker impedance
For all speakers, use speakers of 8 ohms or more.
Connecting + to +, -to - terminals
To
get the proper sound effect, the speaker terminals on the unit
and the speaker should be connected with proper polarity; the +
terminal on the unit should be connected to the + terminal on
the speaker (and – to –),
Be sure to connect the speaker cords correctly as shown in
the illustration on the right column. Improper connections can
cause short circuits in the SPEAKER(S) terminals.
Do not leave objects generating magnetism near the speakers,
"4->
.'
b.JBk
Sub woofer
Center speaker
IENGLISH f ~