Greencut GE420XE Guide D'entretien page 59

ASSEMBLY
STEP BY STEP
WHEELS.
Push the axle through the
rim, tighten the nut and
secure it with a ferrule.
Then fit the hub cap.
Tilt the blade chassis back
slightly and secure the
axle with bolts, washers
and nuts.
59
INSTALL THE DISCHARGE
CHUTE.
Position the discharge chute
on the blade chassis so that
the mounting holes match
the holes in the discharge
chute. Secure with bolts,
washers and nuts.
EN - GE420XE
BASE FOOT
Tilt the blade chassis
slightly backwards and
secure the base foot
with bolts, washers and
nuts. Tow bar: Place the
drawbar on the base
foot and secure it with
M12x100 bolts, washers
and M12 nuts.