Harman JBL STAGE 1200S Mode D'emploi page 4

CA_JBL_Stage 1200S Subwoofer Enclosure_OM_CR_V5.pdf 4 10/23/2020 10:24:27 AM
SPEAKER CONNECTIONS
Connect the + and – terminals on the enclosure to the amplifier's outputs, observing proper polarity. Use at least 0.5mm
(20 AWG) speaker wire for the connections to the enclosure.
BATTERY
SPECIFICATIONS
Stage 1200S
Woofer: 12" (300mm)
Power handling: 250Wrms
Power handling, peak: 1000W
Sensitivity (2.83V @1m): 91dB
Frequency response: 34Hz – 200Hz
Impedance: 2 ohms
Dimensions: 17-3/16" x 14-3/8" x 6-5/16" x 9-15/16"/
(WxHxD1xD2) (436mm x 365mm x 159mm x 252mm)
GENERAL CARE
The loudspeaker may be cleaned with a damp cloth. Do not use any cleaners or solvents.
A valid serial number is required for warranty coverage. This product is designed for mobile applications and is not intended for
connection to the mains.
HEAD UNI T
Remote
L R
Turn-On
Speaker Out
AMP
STAGE 1200S
Stage 1200S
2