Whirlpool AKZ 476 Manuel D'utilisation Et D'entretien page 13

AUTOMATIC OVEN CLEANING
For the description of this function, see the chapter CLEANING and the functions table at page 12.
To activate the oven's automatic cleaning cycle (pyro-cleaning), proceed as follows:
1. Turn the "Functions" knob to symbol
2. Press button to confirm your choice and start the pyro-cleaning cycle.
3
To select ECO pyro-cleaning, turn the "Browse" knob: the word ECO appears bottom right on the display. Press button
the shorter programme.
During pyro-cleaning, the oven door is automatically locked and the symbol
at the end of the cleaning cycle: "COOL" appears on the display, indicating the oven is still cooling down. When the oven cools
to a safe temperature, the symbol
N.B.: the automatic door lock control procedure fails to execute properly, the symbol
hand, the door remains closed due to a fault in the locking system,
contact the After-sales Service.
: the word PYRO appears on the display.
switches off and the display shows "END".
GB11
appears on the display. The door remains locked
appears on the display. If, on the other
and "DOOR LATCHED" appear on the display. In this case,
to start
3