MSI MAG Z790 TOMAHAWK WIFI DDR4 Manuel D'utilisation page 31

PCI_E1~3: PCIe Expansion Slots
BAT1
⚠
Important
If you install a large and heavy graphics card, you need to use a tool such as MSI
∙
Graphics Card Bolster to support its weight to prevent deformation of the slot.
∙ For a single PCIe x16 expansion card installation with optimum performance, using
the PCI_E1 slot is recommended.
When adding or removing expansion cards, always turn off the power supply and
∙
unplug the power supply power cable from the power outlet. Read the expansion
card's documentation to check for any necessary additional hardware or software
changes.
M2_1~4: M.2 Slots (Key M)
M2_3
⚠
Important
∙ Intel® RST only supports PCIe M.2 SSD with UEFI ROM.
∙ If your M.2 SSD equips its own heatsink, please remove the M.2 plates or rubber
cubes in the M.2 slots before installing M.2 SSD. Do not re-install the heatsinks
supplied with your motherboard.
PCI_E1: PCIe 5.0 x16 (From CPU)
PCI_E2: PCIe 3.0 x1 (From Z790 chipset)
PCI_E3: PCIe 4.0 x4 (From Z790 chipset)
M2_1
M2_2
M2_4
29