Publicité
Les langues disponibles
Les langues disponibles
en - Installation notes
Hard-water kit
(APWM062)
APWM 019/020
Connector Box
Peak load/energy
management
10
Care must be taken to drill through the first wall only (I) as there is a
deflecting wall (II) 3/8" (10 mm) behind it.
Connections 3 to 12 are provided for liquid detergent. High-pressure
dispensing systems with water injection must not be connected to
these connections. The connectors are sealed and must be cut to the
diameter of the hose with a small saw before they are connected.
If opened connectors are no longer required, they must be resealed
using a suitable sealant (e.g., silicone).
External dispenser pumps are connected and calibrated via the
Connector Box, which is available as an option.
A flowmeter or flow sensors can be connected for precise monitoring
of the dispensing quantity.
Connections for level monitoring are available for every agent dis-
pensed.
Optional accessories
Only use genuine Miele spare parts and accessories with this ma-
chine.
Using parts or accessories from other manufacturers may void the
warranty, and Miele cannot accept liability.
The hard-water connection on the washing machine can be retrofitted
with the optional hard-water kit (APWM062).
The additional water connection allows hard water to be used and
the program runtime will therefore be reduced. In addition, hard wa-
ter is particularly suitable for the final rinse cycles.
The Connector Box allows external hardware from Miele and other
suppliers to be connected to the Miele Professional Washing Ma-
chine.
Flowmeters for the water inlet can also be connected to the Connec-
tor Box (APWM 065).
A peak-load or energy management system can be connected via the
Connector Box.
Publicité
