Publicité
Les langues disponibles
Les langues disponibles
Caution!
Don't use sharp objects to remove frost from the freezer.
·
Only after the interior completely dry should the appliance
be switched back on and plugged back into the mains
socket.
Door seals cleaning
Take care to keep door seals clean. Sticky food and drinks can
cause seals to stick to the cabinet and tear when you open the
door. Wash seal with a mild detergent and warm water. Rinse
and dry it thoroughly after cleaning.
Caution!
Only after the door seals are completely dry should the
·
appliance be powered on.
Replacing the light bulb
If the internal light does not work anymore, disconnect then
reconnect at once the device.
If the light does not still work, verify if the light bulb is correctly
screwed. If in spite of these tests, there is no light, it is
necessary to change the light bulb. Use a 220-240V~, MAX
10W light bulb.
1. Disconnect the appliance;
2. Open the light cover (1);
3. Undo the defective light bulb anticlockwise.
4. Screw the new light bulb clockwise.
-55-
Publicité
