Bestron SUMMER BREEZE DDF35Z Mode D'emploi page 24

Masquer les pouces Voir aussi pour SUMMER BREEZE DDF35Z:

Les langues disponibles

OPERATION - General

The appliance is intended only

for domestic use,

not for professional use.

1. Fan blades

2. Fan housing

3. Motor housing

4. Oscillation button

5. Stop button

6. Speed buttons

7. Power cord and plug

8. Base

9. Base plate

OPERATION - Before first use

Remove the fan from the packaging.

OPERATION - Assembling the fan

1. Attach the base to the base plate, using the click system.

2. Unscrew the locking ring (see figure 2A) from the shaft.

3. Fit the rear of the fan housing (2B) onto the motor-housing (2C), making sure that the openings are

aligned precisely with the lugs on the motor housing and that the grip is at the top.

4. Slide the locking ring (2A) onto the shaft, and screw it tight (clockwise).

5. Slide the fan blades (2D) onto the shaft and place the fixing knob (2E) on the shaft.

6. The rim (2F) has clamps. Carefully fit the rim around the rear half of the fan housing, making sure that

the housing falls into the upper clamp of the rim, so that you can connect the two halfs of the fan housing

with the nut and bolt (2G). Use a crosshead screwdriver.

7. Close the other clamps.