V.ORLANDI E 50 Instructions De Montage, D'utilisation Et D'entretien page 45

INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS
2)
Reverse slowly the truck, the drawbar eye has to enter the coupling jaw (13)
properly. The push of the drawbar eye against the visible part of the coupling
pin makes the pin (14) fall down immediately and the security pins (18e) are
seated automatically.
18e
ATTENTION: Always ensure that the coupling operation is carried out
properly; check that the operation handle (22A/22B) is down and that
the security pins (18e) are fully seated in order to guarantee a secure
blocking down of the coupling pin (14).
ATTENTION: In case the coupling would not close perfectly move the
truck back and forth about 50 cm to assist the drawbar eye to find the
right position and make the coupling close.
If the coupling will not close perfectly it is absolutely forbidden to travel.
Contact the closest workshop for the solution.
DRAWBAR COUPLING E 50
18e
13
CHAP . 3
OK
22A
18e
PAG.
13/32
REV. F
NO
22B