Publicité
Les langues disponibles
Les langues disponibles
1
2
3
4
5
6
1. Installing fl oor profi les: apply a 5-6mm thick stri-
pe of glue on the two indentations on the profi le.
2. Place the profi le on the fl oor in the desired positi-
on, and press down hard.
3. Carry on with this process with the wall profi le(s).
Make sure that the two sets of profi les are at a 90°
angle.
4. Now apply adhesive to the centre of the smooth
back surface of the profi le(s).
5. Carry on applying the adhesive to the wall profi -
les, only up to the height of one brick (one row).
6. Place the fi rst glass brick on the profi le; start
at the wall. When positioned correctly, the glass
brick should sink down a little. Try to carefully lift
the brick up a little to make sure that the glue is
sticking.
- 9 -
Publicité
