Publicité
Les langues disponibles
Les langues disponibles
13
14
15
16
17
18
13. Install another row of glass bricks as you did
the first. Keep using a spirit level to check that the
glass bricks are aligned.The weight of the glass
bricks means that the first rows could move a little.
Keep checking and adjusting often before the glue
dries.
14. We recommend waiting 12-24 hours for the
adhesive to dry after in- stalling approx. 4 to 5 rows
to avoid the bricks' own weight causing structural
problems. Always wait 24 hours before grouting the
finished wall.
15. Use our glass block FlexFuge for grouting.
Apply the grout diagonally to the glass block by
using a rubber spatula or jointing board. Fill the
joints completely and smooth the joints with a wet
sponge. In this way, the remaining grout is also
removed from the glass blocks.
16. Finally, use a suitable silicon to cover the
connecting joins between the wall/floor and the
glass bricks.
17. If you didn't use end bricks, you can cover
the connecting ends of the wall with end profiles.
Available from us in: aluminium satin, aluminium
white, brushed stainless steel and polished stain-
less steel.
18. Your glass wall is now finished. It will be com-
pletely dried and hardened within 7 days.
- 11 -
Publicité
