Publicité
Les langues disponibles
Les langues disponibles
SETTING
THE CLOCK
A) SETTING THE CLOCK WHEN THE OVEN IS PLUGGED IN:
• When the oven is first plugged into a wall outlet, touch the CLOCK pad once, the display will show
"ENTER CLOCK TIME".
• Enter the correct time of day by touching the correct number pads. You must select at least 3 digits (one for
hour(s) and two for minutes). For minute less than 10, precede the minutes digit with a 0 (ex. 5 minutes past
two, set 2:05). The colon (:) will flash between hour and minute digits. If you prefer not to have the clock
displayed, set the clock for 00:00 and the display will only show a colon.
• Touch CLOCK to lock in the time. Colon will stop flashing and clock will begin to keep current time. After
clock has been set, the word prompt clock will always show on the display unless oven is in a cooking
operation.
B) Changing the clock time.
• Touch the CLOCK pad once, the display will show "ENTER CLOCK TIME".
• Enter the correct time of day by touching the correct number pads. Remember to set at least 3 digits (one for
hour(s), two for minutes), and precede minutes under 10 with a 0.
• Touch CLOCK to lock in the time. Colon will stop flasing and begin to keep current time.
C) Notes on setting the clock.
• If you make a mistake in setting the time, start over by pressing the CLOCK pad twice.
• To recall time of day while you are cooking, press the CLOCK pad. Time will be displayed for 3 seconds
before returning to countdown of cooking time.
• In case of power failure, when the power is restored, the control will be in a clock set mode. Follow
directions for setting the clock.
BEEPS DURING OVEN SETTING;
One Beep: Oven accepts the entry. Information has been entered in the correct sequence.
Two Beeps: Oven does not accept the entry. Check and try again.
SETTING THE
OVEN TIMER
A) Timer works independent from cooking and can be set anytime for various kitchen tasks. Use oven timer
though oven is also timing a microwave cooking function.
SET TIME AS FOLLOWS:
• Touch the TIMER pad. Word prompts ENTER TIMER TIME show on the display. If you are using the
TIMER while cooking, Cooking time countdown will be temporarily replaced on the display while timer is
being set.
• Enter the amount of time you wish to set by touching the correct number pad from one digit (ex. 5 for 5
second) to four digits (2400 for 24 minutes). ENTER TIMER remains on the display.
• Touch START/STOP pad. Word prompt TIMER starts flashing and timer countdown can be seen on display
for 3 seconds before cooking tim is returned to display. Word prompt TIMER is displayed alone with
additional word prompt indicating current cooking mode.
B) Notes on Setting the Oven Timer.
To STOP or RESET TIMER when microwave is not cooking, touch RESET pad.
• When setting timer DURING a cooking operation, take care to set timer correctly. Once the timer is set
during cooking, setting cannot be changed without resetting the cooking function at the same time. Touching
RESET will not allow you to change timer setting while cooking.
• When end of time is reached, one long been can be heard and timer will leave the display. If oven is not
cooking, CLOCK and time of day (if set) will return to the display. If oven is in cooking operation, one long
beep can be heard and TIMER will leave display while oven continues cooking time countdown.
OPERATING INSTRUCTIONS
7
Publicité
