Spengler AUTOTENSIO Manuel Utilisateur page 30

2. With sticky nylon section facing outward, insert end of cuff underneath metal ring of cuff.
3. Fasten cuff about 1-2cm (0.4-0.8'') above the elbow joint. For best results apply cuff to bare arm and keep
level with heart while testing.
Note: Do not insert air plug into opening located on right side of monitor unit.
This opening is designed for an optional power supply only.
Testing
1. Power On
Press and hold " " button until a beep sounds. The LCD screen will appear for one second as unit performs
a quick diagnosis. A long tone indicates device is ready for testing.
Note: Unit will not function if residual air from previous testing is present in cuff.
The LCD will flash "
2. Pressurization
The unit will automatically inflate to the proper pressure value and stop inflating. During this time, please
keep quiet.
" until pressure is stabilized.
30