Télécharger Imprimer la page

Blomberg WNF 6241 WE20 Manuel D'utilisation page 13

Publicité

Les langues disponibles

Les langues disponibles

process, the machine will switch to Pause mode
and the illumination level of the temperature,
speed and loading door indicator lights will
decrease. Other indicator lights and indicators
will turn off. Once the Programme Selection
knob is rotated or any button is pressed,
indicator lights and indicators will turn on again.
Child Lock
Use child lock function to prevent children from
tampering with the machine. Thus you can avoid any
changes in a running programme.
If the Programme Selection knob is rotated
C
when the child lock is active, the lights on the
1
and 2
auxiliary function buttons will blink
st
nd
3 times. The child lock does not allow any
change in the programmes and the selected
temperature, speed and auxiliary functions.
Even if another programme is selected with the
C
Programme Selection knob while the Child Lock
is active, previously selected programme will
continue running.
When the Child Lock is active and the machine
C
is running, you can switch the machine to Pause
mode without deactivating the Child Lock by
turning the Programme Selection knob to On
/ Off position. When you turn the Programme
Selection knob afterwards, the programme will
resume.
To activate the Child Lock:
Press and hold 1
and 2
st
for 3 seconds. The lights on the 1
Function buttons will flash while you keep the buttons
pressed for 3 seconds.
To deactivate the Child Lock:
Press and hold 1
and 2
st
for 3 seconds while any programme is running. The
lights on the 1
and 2
st
nd
will flash while you keep the buttons pressed for 3
seconds.
In addition to the method above, to deactivate
C
the Child Lock, switch the Programme Selection
knob to On / Off position when no programme is
running, and select another programme.
When the power is restored after a power failure
C
or after your machine is unplugged and plugged
in again, the Child Lock will not be deactivated
when the machine resumes operating.
Progress of programme
Progress of a running programme can be followed
from the Programme Follow-up indicator. At the
beginning of every programme step, the relevant
indicator light will turn on and light of the completed
step will turn off.
You can change the auxiliary functions, speed
and temperature settings without stopping the
programme flow while the programme is running.
To do this, the change you are going to make must
be in a step after the running programme step. If the
change is not compatible, relevant lights will flash for
3 times.
If the machine does not pass to the spinning
C
step, Rinse Hold function might be active or the
automatic unbalanced load detection system
Auxiliary Function buttons
nd
and 2
Auxiliary
st
nd
auxiliary function buttons
nd
Auxiliary Function buttons
might be activated due to the unbalanced
distribution of the laundry in the machine.
Loading door lock
There is a locking system on the loading door of the
machine that prevents opening of the door in cases
when the water level is unsuitable.
Loading door light will start flashing when the
machine is switched to Pause mode. Machine
checks the level of the water inside. If the level is
suitable, Loading Door light illuminates steadily within
1-2 minutes and the loading door can be opened.
If the level is unsuitable, Loading Door light turns off
and the loading door cannot be opened. If you are
obliged to open the Loading Door while the Loading
Door light is off, you have to cancel the current
programme; see "Canceling the programme".
Changing the selections after
programme has started
Switching the machine to pause mode
Press the Start / Pause button to switch the machine
to pause mode while a programme is running.
The light of the step which the machine is in starts
flashing in the Programme Follow-up indicator to
show that the machine has been switched to the
pause mode.
Also, when the loading door is ready to be opened,
Loading Door light will also illuminate continuously in
addition to the programme step light.
Changing the speed and temperature settings
for auxiliary functions
Depending on the step the programme has reached,
you may cancel or activate the auxiliary functions;
see, "Auxiliary function selection".
You may also change the speed and temperature
settings; see, "Spin speed selection" and
"Temperature selection".
If no change is allowed, the relevant light will
C
flash for 3 times.
Adding or taking out laundry
Press the Start / Pause button to switch the machine
to pause mode. The programme follow-up light of
the relevant step during which the machine was
switched into the pause mode will flash.
Wait until the Loading Door can be opened. Open
the Loading Door and add or take out the laundry.
Close the Loading Door. Make changes in auxiliary
functions, temperature and speed settings if
necessary. Press Start / Pause button to start the
machine.
Canceling the programme
To cancel the programme, turn the Programme
Selection knob to select another programme.
Previous programme will be canceled. End /
Cancel light will flash continuously to notify that the
programme has been canceled.
Your machine will end the programme when you turn
the Programme Selection knob; however, it does not
drain the water inside. When you select and start a
new programme, the newly selected programme will
start depending on the step the previous programme
was canceled in. For example, it may take in
additional water or continue to wash with the water
inside.
13
EN

Publicité

loading