Delete A Transmitter; Delete All Transmitters - Bosch LE10 Manuel D'utilisation

38 en | Programming
5.3

Delete a transmitter

NOTICE!
Per sequence only one transmitter can be deleted.
To start deleting:
–
Device behavior
–
–
Within these 30 seconds, activate the transmitter that you want
to delete, the following behavior should be observed:
–
–
This indication confirms that the transmitter is deleted. You can
repeat the sequence with another transmitter.
5.4

Delete all transmitters

To start deleting
–
Device behavior
–
–
This indication confirms that all transmitters are then deleted.
NOTICE!
If button T1 is pressed longer than 40 seconds, then the LE10
Radio Receiver will jump out of the programming mode.
F.01U.139.675 | V1 | 2009.10
Press button T1 for min. 5 seconds and max. 10 seconds.
LED 1 stays permanently green, then after 5 seconds
blinks fast 5 times.
LED 2 stays off and then blinks for 30 seconds.
LED 1 stays permanently green.
LED 2 stays permanently red for 5 seconds and then turns
off.
Press button T1 for minimum 20 seconds and maximum 40
seconds.
LED 1 stays permanently green, then after 5 seconds,
blinks fast 5 times. After 20 seconds, LED 1 will blink for
20 seconds.
At that moment, LED 2 lights up permanently red for 5
seconds then turns off.
User Manual
LE10 Radio Receiver
Bosch Security Systems