Specifications - Alto CLARKE SUMMIT Pumper Manuel D'utilisation

Table des Matières

Publicité

DANGER:
Failure to read the Owner's Manual prior to operating or attempting any service or
maintenance procedure to your Clarke Technology machine could result in injury
to you or to other personnel; damage to the machine or to other property could
occur as well. You must have training in the operation of this machine before
using it. If you or your operator(s) cannot read English, have this manual ex-
plained fully before attempting to operate this machine.
DANGER:
Operating a machine that is not completely or fully assembled could result in injury
or property damage. Do not operate this machine until it is completely assembled.
Inspect the machine carefully before operation. Use only as described in this
manual. Use only Clarke Technology's recommended attachments.
WARNING:
injury or damage. Read all machine labels before attempting to operate the
machine. Make sure all of the labels are attached or fastened to the machine. Get
replacement labels and decals from your Clarke Technology distributor.
CAUTION:
Wrap cord around handle when machine is not in use. Use caution not to run over
cord while machine is in use.

SPECIFICATIONS

Model
Summit Pumper
02120A - 02121A
Voltage
120V - 230V
Vac Motor
1 HP, 2 Stage
Tangential
Waterlift
82"
Tank Capacity
16 Gallon
Wheels
4" & 10"
Cord
50'
CFM
97
Drain
Pump-Out
Page -8-
Operating a machine without observing all labels, decals, etc., could result in
A 24" squeegee assembly is available for
mounting to the bottom of the Pumper tank
assembly.
(14605A) Squeegee Assembly - Summit
Vacs.
CLARKE TECHNOLOGY Summit Pumper Operator's Manual

Publicité

Table des Matières
loading

Table des Matières