Specifications - Alto CLARKE Summit 12 Manuel D'utilisation

DANGER:
Failure to read the Owner's Manual prior to operating or attempting any service or
maintenance procedure to your Clarke Technology machine could result in injury
to you or to other personnel; damage to the machine or to other property could
occur as well. You must have training in the operation of this machine before
using it. If you or your operator(s) cannot read English, have this manual ex
plained fully before attempting to operate this machine.
DANGER:
Operating a machine that is not completely or fully assembled could result in
injury or property damage. Do not operate this machine until it is completely
assembled. Inspect the machine carefully before operation. Use only as
described in this manual. Use only Clarke Technology's recommended attach
ments.
WARNING:
Operating a machine without observing all labels, decals, etc., could result in
injury or damage. Read all machine labels before attempting to operate the
machine. Make sure all of the labels are attached or fastened to the machine.
Get replacement labels and decals from your Clarke Technology distributor.
CAUTION:
Wrap cord around handle when machine is not in use. Use caution not to run
over cord while machine is in use.

SPECIFICATIONS

Model Summit 12
02110A
Vac Motor 1 HP, 2 Stage
Tangential
Waterlift 82"
Tank Capacity 12 Gallon
Wheels 4" & 10"
Cord 50'
CFM 97
Drain Hose & Plug
Tools Standard
Page -8-
Summit 12HP Summit 16
02111A 02112A
2 HP, 3 Stage 1 HP, 2 Stage
Tangential Tangential
137" 82"
12 Gallon 16 Gallon
4" & 10" 4" & 10"
50' 50'
101 97
Hose & Plug Hose & Plug
Standard Standard
Summit 16HP
02113A
2 HP, 3 Stage
Tangential
137"
16 Gallon
4" & 10"
50'
101
Hose & Plug
Standard
CLARKE TECHNOLOGY Summit Operator's Manual
Summit 12SQ
02118A
1 HP, 2 Stage
Tangential
82"
12 Gallon
4" & 10"
50'
97
Hose & Plug
Optional