KOBE Brillia Serie Manuel D'installation Et Mode D'emploi page 11

Wiring to Power Supply
SAFETY WARNING
RISK OF ELECTRICAL SHOCK. THIS RANGE
HOOD MUST BE PROPERLY GROUNDED.
MAKE SURE THIS IS DONE BY SPECIALIZED
ELECTRICIAN IN ACCORDANCE WITH ALL
APPLICABLE NATIONAL
ELECTRICAL CODES. BEFORE CONNECTING
WIRES, SWITCH POWER OFF AT SERVICE
PANEL AND LOCK SERVICE PANEL TO
PREVENT POWER FROM BEING SWITCHED ON
ACCIDENTALLY.
5. Connect the electrical wires.
Connect three wires (black, white and green)
-
to house wires and cap with wire connectors.
Connect according to color: black to black,
white to white, and green to green.
Hood Installation
CAUTION: If required to move the cooking
range to install the hood, turn off the power on
an electric range at the main electrical box.
SHUT OFF THE GAS BEFORE MOVING A GAS
RANGE.
6. Align screws with the mounting holes on top of
the range hood, and push toward the wall to
secure the unit in place. Refer to Figure 12 and
Figure 13.
AND LOCAL
9
Figure 12
Figure 13