Axis Communications F44 Guide D'installation page 22

AXIS F44 Dual Audio Input
7. If required, attach the RS232 cable to connect to auxiliary
equipment.
Access the Product
AXIS IP Utility and AXIS Camera Management are recommended methods
for finding Axis products on the network and assigning them IP addresses
in Windows®. Both applications are free and can be downloaded from
www.axis.com/techsup
The product can be used with most operating systems and browsers. We
recommend the following browsers:
• Internet Explorer
• Safari
• Chrome
For more information about using the product, see the User Manual
available at www.axis.com
Reset to Factory Default Settings
Important
Reset to factory default should be used with caution. A reset to
factory default will reset all settings, including the IP address,
to the factory default values.
Note
The installation and management software tools are available
from the support pages on www.axis.com/techsup
For products with multiple IP addresses channel 1 will have the
address
192.168.0.91
To reset the product to the factory default settings:
1. Disconnect power from the product.
®
with Windows
® ®
with OS X
TM ®
or Firefox with other operating systems.
192.168.0.90
and so on.
®
, channel 2 will have the address
22