Axis Communications F44 Guide D'installation page 13

Note
The Network LED can be disabled so that it does not flash when
there is network traffic. To configure, go to Setup > System
Options > Ports & Devices > LED. See the online help for more
information.
Network LED
Green
Amber
Unlit
Power LED
Green
Amber
Connectors and Buttons
For specifications and operating conditions, see page 16.
Network Connector
RJ45 Ethernet connector with Power over Ethernet (PoE).
NO TICE TICE
NO NO TICE
The product shall be connected using a shielded network cable
(STP). All cables connecting the product to the network shall
be intended for their specific use. Make sure that the network
AXIS F44 Dual Audio Input
Indication
Steady for connection to a 100
Mbit/s network. Flashes for
network activity.
Steady for connection to a 10
Mbit/s network. Flashes for
network activity.
No network connection.
Indication
Normal operation.
Flashes green/amber during
firmware upgrade.
13