Silverline 282517 Mode D'emploi page 4

EN
Introduction
Thank you for purchasing this Silverline product. This manual contains information necessary
for safe and effective operation of this product. This product has unique features and, even
if you are familiar with similar products, it is necessary to read this manual carefully to
ensure you fully understand the instructions. Ensure all users of the product read and fully
understand this manual. Keep these instructions with the product for
future reference.
Description of Symbols
The rating plate on your product may show symbols. These represent important information about
the product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
MAX
Maximum load
5000kg
Conforms to relevant legislation and safety standards.
4
Original Instructions
Specification
Product code 282517
Chain Block 5 Tonne
Working Load Limit (WLL) 5000kg
Standard lifting height 3000mm
Max. fixing point elevation 2.7m
Minimum distance between 660mm
hooks
Operating effort (chainpull) to 382N
lift full load
Load chain dimensions 10 x 30mm
Block diameter 210mm
Block thickness
165mm
Hook opening 50mm
Net weight 29.6kg
Operating temperature range -10 to +50°C
As part of our ongoing product development, specifications of
Silverline products may alter without notice.
General Safety
WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and
instructions may result in a serious injury.
WARNING: This tool is not intended for use by persons (including children) with reduced,
physical or mental capabilities or lack of experience or knowledge unless they have been given
supervision or instruction concerning use of the tool by a person responsible for their safety.
Children must be supervised to ensure that they DO NOT play with the tool.
Save all warnings and instructions for future reference.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) DO NOT operate tools in explosive atmospheres, such as in the presence of flammable liquids,
gases or dust.
c) Keep children and bystanders away while operating or using this tool. Distractions can cause
you to lose control.
2) Personal safety
a) Stay alert, watch what you are doing and use common sense when operating or using this tool.
DO NOT operate or use the tool while you are tired or under the influence of drugs, alcohol or
medication. A moment of inattention while operating or using the tool may result in serious
personal injury. Work sensibly at all times with regular breaks if necessary.
b) Use personal protective equipment. Always wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
c) DO NOT overreach. Keep proper footing and balance at all times. This enables better control of
the tool in unexpected situations.
d) Dress properly. DO NOT wear loose clothing or jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.