Star Progetti STAR6 Instructions D'utilisation page 13

CONFIGURING 1 REMOTE CONTROL
WITH 1 CONTROLLER
press button P1 on the card.
•
press the ON button within 2 seconds
•
press the OFF button within 2 seconds
•
CONFIGURING 1 REMOTE CONTROL FOR UP TO 3 CONTROLLERS
CONTROLLER 1
Put the selector on the card of the first controller as per the drawing
press button P1 on the card
•
press the red ON button within 2 seconds
•
press the red OFF button within 2 seconds
•
N.B. If programming is unsuccessful, repeat the programming process.
CONTROLLER 2
Put the selector on the card of the first controller as per the drawing
press button P1 on the card
•
press the red ON button within 2 seconds
•
press the red OFF button within 2 seconds
•
12