Harman INFINITY KAPPA 6 Mode D'emploi page 5

REMOVING THE TWEETER FOR SEPARATE MOUNTING (KAPPA 8 ONLY)
Use the included 2-pin tool to remove the tweeter from the woofer housing. Place the pins of the tool in the holes of the
tweeter grille and rotate 45 degrees clockwise to loosen and remove.
C
45°
D
FLUSH-MOUNTING THE TWEETER
Place the tweeter in the mounting bracket and use the tool to secure by turning 45 degrees counter-clockwise.
A
D
45 °
EN
To transmit audio signal to the tweeter, make sure the woofer and tweeter are connected with the included cable.