Symbols - Ryobi SSP300 Manuel D'utilisation

The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL SIGNAL
DANGER:
WARNING:
CAUTION:
CAUTION:
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
Safety Alert
Read The Operator's Manual
Eye Protection
V Volts
A Amperes
Hz Hertz
Alternating Current
PSI Pressure
GPH Flow Rate
CALIFORNIA PROPOSITION 65
WARNING:
This product, and the paints designed to be applied with this product, may contain chemicals, including lead, known to
the State of California to cause cancer, birth defects, or other reproductive harm. Wash hands after handling.

SYMBOLS

MEANING
Indicates an imminently hazardous situation, which, if not avoided, will result
in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result
in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.
(Without Safety Alert Symbol) Indicates a situation that may result in property
damage.
NAME
Indicates a potential personal injury hazard.
To reduce the risk of injury, user must read and understand
operator's manual before using this product.
Always wear eye protection with side shields marked to comply
with ANSI Z87.1.
Voltage
Current
Frequency (cycles per second)
Type of current
Pressure is measured in pounds per square inch
Flow rate is measured in maximum gallons of paint sprayed per
hour
5 — English
DESIGNATION/EXPLANATION