Symbols - Ryobi P630 Manuel D'utilisation

The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL SIGNAL
DANGER:
WARNING:
CAUTION:
CAUTION:
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
Safety Alert
V Volts
Direct Current
PSI Pressure
GPH Flow Rate
Read The Operator's Manual
Eye Protection
Recycle Symbols
Li - Ion
All manuals and user guides at all-guides.com

SYMBOLS

MEANING
Indicates an imminently hazardous situation, which, if not avoided, will result
in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result
in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.
(Without Safety Alert Symbol) Indicates a situation that may result in property
damage.
NAME
Indicates a potential personal injury hazard.
Voltage
Type or a characteristic of current
Pressure is measured in pounds per square inch
Flow rate is measured in maximum gallons of paint sprayed per
hour
To reduce the risk of injury, user must read and understand
operator's manual before using this product.
Always use eye protection with side shields marked to comply
with ANSI Z87.1.
This product uses nickel- cadmium (Ni-Cd) and lithium-ion
(Li-ion) batteries. Local, state, or federal laws may prohibit disposal
of batteries in ordinary trash. Consult your local waste authority
for information regarding available recycling and/or disposal
options.
6 — English
DESIGNATION/EXPLANATION