Sirius PLUG&PLAY SI-1KIT410 Mode D'emploi page 44

STEP 1 TER : Structure assembly : Installation on the
balcony railing
The solar kit can be mounted to the railing of your balcony. The 5 first steps are
the same as for Installation on the ground, please refer to STEP 1 part.
The micro inverter must be located at a maximum distance of 20m from your
Wifi router, and with a maximum of one wall.
Secure the two
Arc hangers to
Bar (b) of each of the
triangle mount using
M8 * 20 bolts.
Lift the
panel assembly
careful to outside of the
balcony railing, and land
the Arc hangers safely.
Then lock the
hangers to the balcony
railing using M8*120
bolts.
solar
Lock the lower
end of the solar
panel assembly to the
balcony railing using U
fixtures,
Arc that the U fixture land
on above the enhance
bar (d).
make sure