Publicité
Les langues disponibles
Les langues disponibles
4. Installation guide
Before Installation
Before connecting your solar kit to the mains, make the declaration for
Auto-Consumption on the ENEDIS web portal.
During the registration process, ENEDIS will request the DIN VDE 0126-1-1
certificate of the micro-inverter. You can download this certificate by following
this link :
www.mms-support.net/OTA/DG23BL0041_DIN_VDE0126.pdf
Make sure your home is equipped with a LINKY meter. If you do not yet
have a LINKY meter, apply to ENEDIS web portal.
Your electrical installation must comply with the following standards
230V 16A 2P+T socket, connected to a good quality earth (earthing
must be to standard)
Electrical circuit wired in 1.5mm2 and protected upstream by a 16A
thermal-magnetic circuit breaker OR wired in 2.5mm2 and protected
upstream by a 20A thermal-magnetic circuit breaker
Electrical circuit protected upstream by a 30mA earth leakage switch
For better production
Find a location that remains sunny throughout the day
Tilt the panels for better solar production
Give preference to a southern orientation
Please handle solar panels with caution and verify you have a socket
within 10 m from the kit.
Necessary tools
SCREWDRIVER
PENCIL
DRILL/DRIVER
6mm ALLEN KEY
13mm WRENCH
Publicité
