Publicité
Les langues disponibles
Les langues disponibles
Align the horizontal gap between the doors:
9
CAUTION
To avoid damage to the appliance, move the
right-hand door down if the door pillar at the top
collides with the housing.
Remove the contents from the doors, if
Note:
present.
Open the door and drawer.
1.
Lift the door and insert a screwdriver into the door
2.
hinge from below.
Installation and connection en-us
Push up the adjustable part and turn by 60° until
3.
the desired position is reached.
– The door height can be set at 2 levels,
adjusted by 1/16" (1.5 mm) in each case. The
higher level is followed by the lower. The
adjustable part engages as soon as a position
is reached.
– To move the door up, turn clockwise.
– To move the door down, turn
counterclockwise.
To check the position, close the door and drawer
4.
and correct if necessary.
9
Publicité
