Velleman CAMTVI7N3 Mode D'emploi page 4

CAMTVI7N3/CAMTVI7WN3/CAMTVI8N3/CAMTVI8WN3

Damage caused by disregard of certain guidelines in this manual is not
covered by the warranty and the dealer will not accept responsibility for
any ensuing defects or problems.

Keep this device away from extreme heat.

Protect this device from shocks and abuse. Avoid brute force when
operating the device.

Do not use this product to violate privacy laws or perform other illegal
activities.
4. Features
This HDCCTV camera is equipped with a CMOS image sensor. The
video image quality is 1080P. The video signals can be set to HD-TVI, HD-
CVI, AHD and analogue video signals. The IR-cut filter will filter the IR
light, so it cannot distort the colour image. When it gets dark, the camera
automatically switches to night mode. In night mode, the camera enables
the IR LEDs and disables the IR-cut filter.

weatherproof

with B/W night vision (IR LEDs)

1080P video signal

vandal-proof housing

varifocal lens (CAMTVI8N3/CAMTVI8WN3 only)
5. Overview
Refer to the illustrations on page 2 of this manual.
1 mounting plate
2 fixation ring
3 positioning ring
4 lens enclosure (sphere)
6. Hardware installation
Refer to the illustrations on page 2 of this manual.

Choose a location for the camera, keeping following guidelines in mind:
do not install the camera in locations where extremely high or low
o
temperatures or excessive vibrations may occur.
avoid mounting the camera near high electro-magnetic fields.
o
do not aim the camera at the sun or other extremely bright objects
o
or reflections (e.g. metal doors).

Hold the mounting plate and unscrew the fixation ring by turning it
counter-clockwise. Note that the lens enclosure and positioning ring are
also released.
V. 01 – 04/07/2019
5 light sensor
6 lens
7 cable slot
8 cable
4 ©Velleman nv