Franke FST PRO BK 904 Manuel D'utilisation page 11

T2 Short
Long
T3 Short
Long press
with all loads
off (motor and
lights)
Short
T4
Long press
with all loads
off (motor and
lights)
-
S1
-
WARNING: the hood starts with the
temperature sensor activated.
WARNING: the sensor must always be
activated when used with gas hobs; it
does not work with induction hobs.
With the hood off, when the temperature
perceived by the sensor exceeds the set
limit, the hood switches on at the
second speed. When the temperature
perceived by the sensor returns below
the threshold value, the hood switches
off. If the temperature does not return
below the threshold value for approxim-
ately 90 minutes, the hood switches off
(the sensor remains deactivated for ap-
proximately 15 minutes and then returns
to the previously set operation). Manu-
ally intervening on the hood (ignition/
speed change) the sensor is deactiv-
ated and the hood must be switched off.
After turning off the hood, the sensor re-
mains deactivated for approximately 15
minutes, after which it returns to the pre-
viously set operation.
The temperature sensor does not guar-
antee automatic switching on of the
hood as its operation is affected by en-
Turns the motor on at the second speed.
Activates/Deactivates the Activated Carbon Filters alarm.
Turns the motor on at the third speed.
The filter saturation alarm is reset.
Turns the motor on at the Intensive speed.
This speed is timed for 6 minutes. At the end of this time, the system auto-
matically returns to the previously selected speed. If activated with the mo-
tor off, once the time has passed it switches to OFF mode.
It is deactivated by pressing the same key or by switching off the motor.
Activates/Deactivates the remote control.
Signals the saturated Metal Grease Filters alarm and that they need
washing. The alarm is activated after 100 hours of effective hood opera-
tion.
Signals the Activated Carbon Odour Filter saturation alarm. The alarm is
activated after 200 hours of effective hood operation.
vironmental conditions, types of cook-
ing, height and installation of the hood
(tested at 530 mm).
5. REMOTE CONTROL
(OPTIONAL)
6. LIGHTING
• Please contact the Service Depart-
ment to change it ("Please contact
the service department to purchase
it").
• Lamps in risk group 1 under IEC/
EN62471 at a distance of 20cm and
in exempt from risk group under IEC/
EN62471 at a distance of 30cm.
Fixed
LED T2 flashes
twice: alarm activ-
ated.
LED T2 flashes once:
alarm deactivated.
Fixed
LED S1 flashes 3
times.
Fixed
LED T4 flashes
twice: remote control
activated.
LED T4 flashes once:
remote control deac-
tivated.
Fixed
Flashes
11