Sharp AY-XP9FR Mode D'emploi page 10

BASIC OPERATION
DISPLAY
MODE 1h
CLEAN
FAN
SWING
SET/C
Press the MODE button to select the op-
1
eration mode.
Press the ON/OFF button to start opera-
2
tion.
• The red OPERATION lamp (
2
will light.
5
Press the THERMOSTAT button to set the
3
desired temperature.
3
AUTO/DRY MODE
1
• The temperature can
be changed in 1°C in-
crements within the
range of 2°C higher to
4
2°C lower from the
temperature automati-
cally determined by
the air conditioner.
COOL/HEAT MODE
• The temperature can
be set within the range
of 18 to 32°C.
Press the FAN button to set the desired fan
4
speed.
• In the DRY mode, the fan speed is preset to
AUTO and cannot be changed.
To turn off the unit, press the ON/OFF but-
5
ton again.
• The red OPERATION lamp (
will turn off.
E-8
AUTO HEAT COOL
(Example: 1°C higher)
(Example: 2°C lower)
AUTO SOFT LOW
DRY
) on the unit
C
C
HIGH
) on the unit