Ego Power+ CS2000 Guide D'utilisation page 47

◾
Cracked or broken rails.
◾
Spread rails.
The guide bar has a sprocket at its tip.
The sprocket must be lubricated weekly
with a grease syringe to extend the guide
bar life (Fig. 42 & 43). Turn the nose
sprocket while pumping grease into the
lubricating hole until the entire sprocket
has new grease. Do not push dirt into the
hole.
56V LITHIUM-ION CORDLESS 20" CHAIN SAW — CS2000/CS2000-FC
41
Bar Rails
Lubricating Hole
42
43
Lubricating Hole
Sprocket in
Guide Bar Tip
47