Publicité
Les langues disponibles
Les langues disponibles
5. Press and hold the lock-off button with the thumb of your right hand, then
squeeze the trigger switch with the fingers of your right hand to start the saw.
6. Release the lock-off button and continue to squeeze the trigger switch for
continued operation. The further the trigger switch is depressed, the greater the
chain speed.
WARNING:
a cut or in contact with any surface.
To Stop the Chain Saw
1. Move the chain saw away from cutting area, and then release the trigger switch
to stop the chain saw.
2. Push the chain-kickback brake paddle forward to the brake position to engage
the chain brake (see Fig. 1).
WARNING:
breaks and after finishing work.
CHANGING SPEED MODE (Fig. 13)
This machine features three speed modes. Each speed modes limits the maximum
speed of the chain saw.
The speed mode will change with every
press of the chain speed mode button.
The speed bars on the LCD screen will
display the active speed mode: one bar for
low speed, two bars for medium speed,
and three bars for high speed. The low
speed mode (ECO) provides better control
of the machine and longer operating time
per charge.
NOTE:
When using EGO battery pack rated 2.5Ah or less, only the ECO mode is
available. And use of EGO battery pack rated less than 6.0Ah will not allow you to
achieve high speed. For best performance, we strongly recommend use of EGO battery
packs that are 6.0Ah (e.g., BA3360T/BA3360T-FC) or more.
NOTE:
The machine's speed memory function will remember the last speed setting
and activate it the next time the machine is turned on.
56V LITHIUM-ION CORDLESS 20" CHAIN SAW — CS2000/CS2000-FC
Do not attempt to start the chain saw when the saw chain is in
Always remove the battery pack from the chain saw during work
Headlight Icon
13
Bluetooth
Icon
Speed
Bars
Chain
Speed
Button
Brake Icon
Fuel-gauge
Circle
Headlight/
SPEED
Bluetooth
Button
29
Publicité
