Publicité
DECLARATION OF A STANDARDS CONFORMITY
The producer confirms that the devices agree with CEE 90/396 standards, rule nr. 22/1997 sb. and with relevant
goverment orders. Instalation must be done with respect to valid standards. Attention, the producer refuses
any responsibility in case of direct or indirect damages which are caused due to wrong instalation, incorrect
intervention or modification, insufficient maintenance, incorrect use and also possibly caused by other reasons
presented by items in sale conditions. This appliance is set only for skilled use and must be operated by qualified
persons only. Parts set and secured by the producer or accredited person must not be rebuilt by user.
DEVICE INSTALATION
Instalation, setting, rebuilding for another gas type, putting into operation must be done by qualified person who
is competent for this and according to the valid standards. The device can be instalated in good ventilated room.
When it is possible place the device under the fumehood to suck off the products of combustion. Air needy to the
burning is 2m/3/h/kW ot the performance of the instaled device.
The device can be instalated separately or in a set with devices of our production. Min. distance 10 cm from other
subjects must be kept.It is also necessary to prevent our product from contact with combustible materials. In this
case you must make corresponding changes to secure heat izolation of combustible parts (for example:place
between the device and combustible material azbestos plate).
2
Publicité
