EZiclean connect x600 Manuel Utilisateur page 14

To clean the sensors, follow the instructions below:
The charging base, robot and bumper sensors contain sensitive electronic components. Use a dry cloth to clean them
and be careful not to moisten them as this may cause damage.
1. Clean the sensors
loading
- If you do not use the product for a long time, charge it fully before storing it.
- Turn off the device and continue to charge it every 3 months to prevent the battery from fully discharging.
- If the battery is too discharged or not used for a long time, the product may not be able to be recharged. Contact our
company for after-sales service. Do not disassemble the product yourself.
2. Clean the robot sensors
Technical characteristics
ezi
clean
Dimensions (mm): 330 x 76
Weight (kg): 2,800
Max area : 120m²
Navigation technology: CameraSlam
Max decibels : 55dB
Battery: Lithium-ion - 2600 mAh
Autonomy: 120 min
Charging time: 4 hours
Automatic return to base: Yes
Technology Corner Detection: CORNER
Capacity: 600 mL
Anti-Allergen: HEPA filter
Remote control: Yes
Connected via app: Yes
Water tank: No
ezi
clean aqua connect x650 :
®
Dimensions (mm): 330 x 76
Weight (kg): 2,800
Max area : 120m²
Navigation technology: CameraSlam
Max decibels : 55dB
Battery: Lithium-ion - 2600 mAh
Autonomy: 120 min
Charging time: 4 hours
Automatic return to base: Yes
Technology Corner Detection: CORNER
Capacity: 600 mL
Anti-Allergen: HEPA filter
Remote control: Yes
Connected via app: Yes
Water tank: Yes
EN
connect x600 :
®
TM
- Mapped with video
TM
TM - Mapped with video
TM
3. Clean the central wheel